DM9621A USB2.0 to 10/100M Fast Ethernet Controller
1、芯片描述:
The DM9621A USB to 10/100Mbps Fast Ethernet controller is a high performance and highly integrated ASIC with embedded SSRAM for packet buffering. It enables low cost and affordable Fast Ethernet network connection to desktop, notebook PC, and embedded system using popular USB ports. It has an USB interface to communicate with USB host controller and is compliant with USB specification V1.0, V1.1 and V2.0. It implements 10/100Mbps Ethernet LAN function based on IEEE802.3, and IEEE802.3u standards. DM9621A integrates an on-chip 10/100Mbps Ethernet PHY to simplify system design and provides an optional Reduce media-independent interface (RMII)(点击即可咨询芯片详细信息)
2、芯片特性:
· USB Interface
USB2.0 Device
Support 12Mbps full speed operation
Support 480Mbps high speed operation
Support suspend mode and remote wake-up resume
Support USB standard commands
Support vendor specific commands
Efficient TX/RX FIFO auto management.
Embedded SRAM for RX/TX packet buffering
Supports 4endpoints (Control, Interrupt, Bulk IN, Bulk OUT)
Supported Classes: USB Common Class / USB Communications Class
·Ethernet
Support IEEE802.3u 100BASE-TX and with IEEE802.3 10BASE-T standards
Support IEEE802.3x flow control function for 100BASE-TX and 10BASE-T.
Support IEEE 802.3az Energy Efficient Ethernet (EEE)
Built-in 10/100Mbps Fast-Ethernet PHY with Auto-MDIX
Supports RMII interface or 8 pins GPIO
Support Auto-Negotiation function
Back Pressure Mode for Half-Duplex mode flow Control
PAUSE frame for Full-Duplex flow control
Support Power management: Wake-on-LAN, ARP/NDP Offload
Supports GPIO, wakeup frame, link status change and Magic packet events for remote wake-up
Support TCP / UDP / IPv4 checksum offload checking and generating
· EEPROM Interface
Supports 128/256/512 bytes (93C46/93C56/93C66) of serial EEPROM(for storing USB Descriptors)
93C46/93C56/93C66 auto-detection
3、应用线路图:
5. 封装(脚位)
桑尼奇科技是深圳市知名的IC代理商,能为广大工程师与采购朋友提供众多类型产品,小批量当天交货,10K以上5-10天交货。